Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Dec 20, 2016 9:44:19 GMT -5
This question goes out to those that have converted Royals into Bluesmobiles, how did you wire the front marker lights and turn signals? Is there a harness that plugs into the existing Royal wiring or are we cutting and splicing?
Thanks in advance!
|
|
|
Post by spanks79 on Dec 20, 2016 15:58:37 GMT -5
You will likely end up needing to make your own sub harnesses. My car was a non royal car but I ended up using a royal wiring harness, so I had to build new harness. I didn't go into it to much on my build thread but here is where I did it. bluesmobiles.proboards.com/post/14980/threadA little time spent with the 76 and 74 wiring diagram and I was able to figure it out. Its basically 3 wires.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Dec 20, 2016 17:57:08 GMT -5
Thanks, let me read through it!
|
|
|
Post by 58hemifury on Dec 20, 2016 18:49:48 GMT -5
Thanks Spanks (nice rhyme), you saved me the trouble of trying to explain it without really confusing these guys.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Dec 21, 2016 10:05:23 GMT -5
Well, not only did I read about my question, I re-read the whole damn thread last night and it is awesome. The level of work you've put into the car is astounding.
I also bought the same type of review mirror, either out of a B or E body and thought I made a mistake, but I see that it will work just fine.
|
|
|
Post by spanks79 on Dec 22, 2016 16:23:06 GMT -5
Well, not only did I read about my question, I re-read the whole damn thread last night and it is awesome. The level of work you've put into the car is astounding. I also bought the same type of review mirror, either out of a B or E body and thought I made a mistake, but I see that it will work just fine. Haha, Thanks! It was a crazy build, kind of snowballed out of control. There are a few odds and ends that I'd still like to go back and change but all in all its a super solid car.
|
|