Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Oct 29, 2016 17:29:06 GMT -5
Any tricks on getting the A-pillar trim off? I can lift enough to see the clips, but can't figure out how to remove the trim from them.
Thanks in advance
Brian
|
|
|
|
Post by 58hemifury on Oct 29, 2016 19:44:08 GMT -5
They suck, after lifting the molding up there are 3 clips per side you have to push out of slots on actual pillar without damaging the molding or breaking the windshield. I was lucky enough that when I built my car the windshield was already broken so I didn't have to be careful. There's some info from member "cbody" on how to remove them here bluesmobiles.proboards.com/thread/1870/sold-58-hemifurys-bluesmobile-project?page=3 |
|
|
|
Post by gtopat on Oct 29, 2016 20:43:41 GMT -5
DO NOT LEVER AGAINST THE EDGE OF THE WINDSHIELD IN ANY WAY WHAT-SO-EVER! No matter how much it looks like you need to. You WILL crack/chip it.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Nov 11, 2016 9:49:23 GMT -5
Thanks Gentlemen! I was able to get them off WITHOUT cracking the windshield! So I got that going for me, which is good.
|
|
