|
Post by dodgeroyalmonaco19 on Mar 20, 2012 22:50:42 GMT -5
hey guys i was wondering my gas gage seems to have stopped working 100% when i start my car it used to move from below E to go to full when i had a full tank, and move along normaly while i drive, 3/4, 1/2 and 1/4 tank. Now it rise to the E and sits there. it seems to want to go where it should to tell me how much gas i have left but dose not . Hoping this helps u guys help me figure it out it just came out of storage for the winter and it was a pretty cold winter.
|
|
|
Post by blusmbl on Mar 20, 2012 23:29:06 GMT -5
The float could be sunk, may have cracked and filled with fuel and now will not float on top of the fuel giving you the correct indication. The wire could have been pinched in the trunk floor area if something heavy was put in there, or has come loose at the tank sender.
|
|