|
Post by Steam McQueen on Sept 14, 2011 12:23:19 GMT -5
|
|
|
Post by Bismo on Sept 14, 2011 20:05:28 GMT -5
I used them (well, showed 'em to my welder to use!)... And I endorse these plans for Bluesmobiles everywhere!
|
|
|
Post by klausblues on Mar 5, 2013 15:48:52 GMT -5
Here my informations of the pushbar for the BB2K-Bluesmobile. I found 2009 this drawing on BBC: I converted the inch in cm and orderd the material (iron). At the company where I work the welder put it together, some black paint and thats the result: The pushbar fits in the trunk. When I need the pushbar I clip it on the front without any screw! But I use it only on us-car-meetings and blues brothers events, not on normal streets.
|
|
|
Post by legendaryacura8 on Jun 15, 2013 9:56:04 GMT -5
Hey Bismo (or anyone else who has used JKNLWD's pushbar plans), how much did it cost you to have it fabricated?
|
|
|
Post by Bismo on Jun 16, 2013 1:25:10 GMT -5
Embarrassing but I don't remember off the top of my head (had mine done a bit over two years ago), I should have my receipt in my office desk so I'll try and dig it up for you beginning of the week! A few Benjamins though.
|
|
|
Post by Bismo on Jun 16, 2013 1:28:26 GMT -5
I do remain DELIGHTED with the final product though!
|
|
|
Post by tk826 on Jun 16, 2013 1:37:14 GMT -5
I had the local steel supply shop cut all of the necessary pieces to assemble the bar. It cost me just over $50.
Still casually looking for a welder to take on the side job of putting it together.
|
|
|
Post by spanks79 on Jun 16, 2013 10:10:57 GMT -5
tk, if you have the dimensions and the material already cut to length, I am a pretty good welder. If you pay the shipping, I'll melt it together.
|
|
|
Post by Bismo on Jun 17, 2013 19:26:37 GMT -5
Dug up my old receipt, $490 bucks to get mine fabricated (materials and installation included). Pure commercial, nothing done myself though.
|
|
|
Post by antblues on May 1, 2016 14:11:22 GMT -5
Anyone have any dimensions for 74 Monaco push bar design?
|
|
|
Post by 58hemifury on May 1, 2016 16:09:14 GMT -5
The liquid realities guy took down his plans, that's how i got mine. Maybe, hopefully someone downloaded or printed them.
|
|
|
Post by goodm3 on May 7, 2016 14:38:05 GMT -5
I need the pushbar plans also. If someone has them, please send to me and I'll put online permanently for all to see.
|
|
|
Post by goodm3 on May 9, 2016 15:42:47 GMT -5
Someone must have them?
|
|
|
Post by goodm3 on May 9, 2016 15:50:59 GMT -5
|
|
|
Post by Bismo on May 10, 2016 21:34:59 GMT -5
That looks right to me... I feel pretty sure I should have them on one of my home PCs, I'll try and check this weekend (busy coupla days coming up), but I do think those are the ones I used (successfully)....
|
|