|
Post by spyphish on Aug 3, 2017 20:53:02 GMT -5
Made it back to La. She is TOO rusty down low for me. Will pull the drive train this weekend, E86 code steel crank motor stuck but no visible carnage so still optimistic we can use it. There is a great hood, front header, grill and truck deck lid if anyone needs it. Good 4 door post glass and regulators, one door rough. Bumpers and tail lights a 7 on 10. Cop seats need recover or off to the crusher. Ran the VIN and never stolen. Stephen 337-499-44 three five if you need parts for your Fury after Labor day. Thanks
|
|
|
Post by Steam McQueen on Aug 4, 2017 12:07:36 GMT -5
|
|
|
Post by spyphish on Aug 5, 2017 6:12:24 GMT -5
Going to put her out of her misery in a few hours when the strip begins. Both front and back seats would need recovering and some foam added to drivers side front. Probably not worth shipping but if someone close needs them; bring a case of Coors. Phish
|
|
|
Post by spyphish on Aug 5, 2017 13:45:16 GMT -5
Car is dead. BUT the motor is a E86 steel crank 375 HP 440. Heads are shot but block, crank, rods and pistons all very good. Previous owners must have tried to free the motor as it was full of Marvel oil. What happened was the engine sat so long that the valves that were open were stuck. When they rolled the motor with a cheater or whatever, the pistons snapped the valve heads off. They bound the motor as no where to go. No way they broke when it was running as the piston tops are clean. The block could take a hone and go back together. It was worth $800.
Going to strip the remaining parts and send to the crusher.
|
|
|
Post by spyphish on Mar 9, 2018 9:23:19 GMT -5
This car is numbers matching E86 440 package with HiPo exhaust. It is coming back to life as a Lemons 24 CAJUN PEAUX PEAUX car. Had to buy one head and a water pump housing. Steel crank and rotating assembly was good. Has a tan police front seat that need recovering if anyone needs it.
|
|
|
Post by Melvin Blues on Mar 9, 2018 12:24:00 GMT -5
How's the speedometer? A certfied one? Are all the gages in good condition?
|
|
|
Post by spyphish on Mar 9, 2018 13:25:59 GMT -5
Previous got all that. Not much left but the driveline
|
|